Logic ICs
Logic ICs components are essential building blocks in modern electronic systems. FindMyChip sources Logic ICs ICs from authorized China distributors with competitive pricing and reliable stock.
6 components
How to Choose Logic ICs Components
- 1Verify electrical specifications (voltage, current, frequency) match your design requirements.
- 2Check package footprint and thermal characteristics against your PCB layout constraints.
- 3Confirm lifecycle status and long-term availability for production designs.
Popular Applications
Consumer Electronics
Smartphones, tablets, and smart home devices
Industrial Systems
Factory automation, control systems, and monitoring
Automotive
In-vehicle electronics and advanced driver assistance
Telecommunications
Base stations, routers, and network equipment
Logic ICs Guides & Articles
MCP2551-E/SN CAN Transceiver Board Validation Guide
Validate MCP2551-E/SN CAN boards through logic checks, termination measurements, timing budgets, and repeatable harness tests.
Nov 1, 2026
How to Choose a GRM185B31C105KE43D MLCC: Selection and Procurement Guide
Select and source GRM185B31C105KE43D MLCCs using bias, voltage, temperature, package, and traceability checks across four catalog candidates.
Nov 1, 2026
GRM185B31C105KE43D MLCC Design and Validation Guide
Validate GRM185B31C105KE43D decoupling with effective-capacitance budgets, rail tests, layout checks, and controlled replacement reviews.
Oct 31, 2026
LMR36015FBRNXR Selection Guide: Variants, Ratings and Procurement
Select LMR36015FBRNXR by input range, load margin, exact suffix, packaging and traceability; compare five related buck-converter candidates.
Oct 31, 2026
All Logic ICs Components
Showing 1–6 of 6
CD4048BM96G4 is a CMOS 8-input multifunction gate IC by Texas Instruments in a 16-pin SOIC package with 3-state output. Key specs: 50 pF load capacitance, CD4000 series logic family, tape-and-reel packaging. From $0.30, in stock with worldwide shipping.
CD4049UBF is a CMOS hex inverter buffer with CMOS-to-TTL level translation capability by Texas Instruments in a 16-pin ceramic DIP package. Key specs: 6 inverter functions, 50 pF load capacitance, 18 mA output low current. From $0.40, in stock with worldwide shipping.
The CD74HCT154M96 is a high-speed CMOS 4-to-16 line decoder/demultiplexer from Texas Instruments HCT family. It accepts four binary-coded address inputs (A0–A3) and activates one of 16 mutually exclusive outputs LOW, making it ideal for address decoding, memory chip-select generation, and data routing in TTL-compatible 5V digital systems. Two active-LOW enable inputs (E1, E2) must both be LOW for normal decode operation, providing convenient cascading and output blanking. The M96 suffix denotes a 24-pin wide-body SOIC package for reliable SMD assembly.
74AHCT1G14DCKT is a single CMOS Schmitt trigger inverter by Texas Instruments with an 8 mA output drive in a 5-pin SC-70 package. Key specs: 4.5 V to 5.5 V supply range, Schmitt trigger input with hysteresis, propagation delay under 10 ns. From $0.15, in stock with worldwide shipping.
CD74HC4049NSR is a hex inverting buffer and CMOS-to-TTL level translator IC by Texas Instruments in the HC/UH family. Key specs: 6 inverter functions, 50 pF load capacitance, 4 mA output sink current, 16-pin SOIC package. From $0.30, in stock with worldwide shipping.
The SN7406DR is a hex inverting buffer and driver with open-collector outputs from Texas Instruments, housed in the SOIC-14 surface-mount package. It contains six independent inverter/driver channels, each capable of sinking up to 40 mA at 30 V, making it ideal for driving TTL logic levels into higher-voltage loads such as relays, indicator lamps, and bus lines. The open-collector architecture enables wire-AND logic and direct interface to MOS and CMOS devices. Operating over the commercial temperature range of 0°C to 70°C, the SN7406DR is a compact and cost-effective solution for level shifting and load-driving applications in industrial and consumer electronics designs.